Chapter 3 — Algebra
Algebra is the largest of the five higher-maths categories: 17 to 20% of the test, so eight or nine questions. Together with Functions in the next chapter it accounts for well over a third of everything you will be asked.
The good news is how narrow it is. Almost every question here is one of six things: solve for a letter, solve two equations at once, expand, factor, rearrange a formula, or handle a power. This chapter takes each in turn.
A warning carried over from Chapter 0. The ACT gives you no formula sheet, so the quadratic formula is not printed anywhere on the paper. It is in Chapter 8 with the rest, and you need it from memory.
Topics covered: linear equations · linear inequalities · systems of equations · expanding and factoring · quadratic equations · the discriminant · radical and rational equations · exponential relationships · rearranging a formula
Section 1 — Linear Equations and Inequalities
To solve a linear equation, undo what was done to the variable, in the reverse order it was done, doing the same to both sides.
For an inequality there is exactly one extra rule, and it is the one that costs marks:
Multiplying or dividing by a negative number reverses the inequality sign.
Adding and subtracting never do. Only multiplying or dividing by a negative.
Topic: A linear equation with brackets on both sides
A technician's two readings agree only at one value of , where . What is the value of ?
A)
B)
C)
D)
Show the worked solution
Answer: D
Explanation
Expand both sides first:
Gather the terms on the left and the numbers on the right:
An awkward fraction is not a sign of an error. Check by substituting: the left gives , and the right gives . Correct.
Why each wrong option is wrong:
- A, — multiplied the 5 by but not by the .
- B, — dropped the on the right.
- C, — expanded as , multiplying only the first term.
Takeaway: the bracket multiplies everything inside it. Expand fully on both sides before you gather anything.
Topic: An inequality that needs the sign reversed
A machine setting must be chosen so that the quantity stays at or above the safety threshold of 19. Which of the following gives all values of that satisfy ?
F)
G)
H)
J)
Show the worked solution
Answer: F
Explanation
Subtract 7 from both sides — this does not affect the direction:
Now divide by . Because is negative, the sign turns round:
Check with a value. Take , which satisfies : , and . Correct. Now take , which does not: is false. Correct again.
Why each wrong option is wrong:
- G, — divided correctly but left the sign pointing the same way.
- H, — flipped the sign but lost the minus on the 3.
- J, — did neither.
Takeaway: dividing an inequality by a negative reverses it. If you are ever unsure, test one number from your answer — it settles the question in five seconds.
Topic: An equation with no solution
In the equation , is a constant. The equation has no solution. What is the value of ?
A)
B)
C)
D)
Show the worked solution
Answer: B
Explanation
Both sides are of the form .
"No solution" means the terms cancel — leaving no to solve for — while the constants disagree. The terms cancel exactly when their coefficients match:
Then the equation becomes . Subtract from both sides:
which is false whatever is. So there is no solution.
Contrast with infinitely many solutions, which the ACT also asks: that needs the coefficients to match and the constants to match too. Same first condition, opposite conclusion — the constants decide which one you get.
Why each wrong option is wrong:
- A, — right size, wrong sign; gives , which has one solution.
- C, and D, — matched a constant rather than the coefficient.
Takeaway: no solution means the terms cancel and the numbers do not. Infinitely many means both cancel. Check the constants to tell them apart.
Topic: A three-part inequality
A process runs correctly only while the quantity stays above and at the same time does not exceed 13, where is a measured input. If , which of the following gives all possible values of ?
F)
G)
H)
J)
Show the worked solution
Answer: J
Explanation
Treat it as one chain and do the same thing to all three parts.
Subtract 4 everywhere:
Divide by 3 everywhere — 3 is positive, so nothing flips:
The kind of each end matters as much as its value. The left was strict () and stays strict; the right allowed equality () and still does.
Why each wrong option is wrong:
- F, , H, and G, — all have the right numbers and the wrong ends. Copy each inequality sign down unchanged as you go; that is the whole difficulty.
Takeaway: in a three-part inequality, operate on all three parts together and carry each sign down exactly as it was.
Section 2 — Systems of Equations
Two equations, two unknowns. Two methods, and the choice between them is worth making deliberately:
Substitution — best when one equation already gives a variable on its own. Put that expression into the other equation.
Elimination — best when neither does. Add or subtract the two equations so one variable disappears, scaling one or both first if needed.
The ACT also asks about systems with no solution (parallel lines: same slope, different intercept) and infinitely many (the same line twice).
Topic: A system solved by elimination
Two orders placed with the same supplier satisfy and , where and are quantities of two items. What is the value of ?
A)
B)
C)
D)
Show the worked solution
Answer: B
Explanation
Add the two equations. The and cancel:
Check by finding too: gives , so . Put both into the second equation: . Correct.
Why each wrong option is wrong:
- A, — solved correctly and gave . Always check which letter the question asked for; this is the most common way to lose a mark you have earned.
- C, — added the two right-hand sides to get 32 and never divided by 8.
- D, — added the coefficients of and stopped.
Takeaway: when the coefficients of one variable are equal and opposite, add. When they are equal and the same, subtract. Then answer for the letter asked for.
Topic: A system needing both equations scaled
Two conditions on the same pair of quantities are recorded as and . What is the value of ?
F)
G)
H)
J)
Show the worked solution
Answer: F
Explanation
To remove , make its coefficients match. Multiply the first equation by 3 and the second by 2:
Now subtract the second from the first:
Check: from the first equation , so ; and . Correct.
Why each wrong option is wrong:
- H, — gave , which is 2.
- G, — scaled the equations and then never combined them.
- J, — copied the from the right of the second equation.
Takeaway: to eliminate a variable, multiply each equation by the other's coefficient. Then subtract if the signs match and add if they do not.
Topic: A system with no solution
The system , where is a constant, has no solution. What is the value of ?
A)
B)
C)
D)
Show the worked solution
Answer: B
Explanation
Parallel lines have the same slope. Rearrange each into form.
From the first: , so , slope 3.
From the second: , so , slope .
Set the slopes equal:
Check that the lines are not identical, which would give infinitely many solutions instead: with the second equation is , or . Same slope, different intercept ( against ), so they are parallel and distinct. No solution. Correct.
Why each wrong option is wrong:
- A, — got the size right and the sign wrong.
- C, — divided the wrong pair of coefficients.
- D, — took a coefficient from the first equation.
Takeaway: no solution means equal slopes and different intercepts. Always check the intercept too — equal slopes and equal intercepts is the opposite answer, infinitely many.
Section 3 — Expanding and Factoring
Expanding and factoring are the same operation in opposite directions, and the ACT asks for both.
Three patterns are worth knowing on sight, because spotting them saves the time that the ACT is really testing:
The middle term in the first two is what people forget. is not .
To factor , find two numbers that multiply to and add to .
Topic: Squaring a binomial
A cost model contains the expression , and it must be written out without brackets before the terms can be collected. Which of the following is equivalent to ?
F)
G)
H)
J)
Show the worked solution
Answer: J
Explanation
means . Multiply every term by every term:
There are two middle terms, both , so together they make :
Check at : the original is , and . Correct.
Why each wrong option is wrong:
- F, — squared each term separately. There is always a middle term.
- G, — used the difference-of-squares pattern, which is for , not for a square.
- H, — found one middle term instead of two.
Takeaway: . Square the whole first term, coefficient included, and double the middle.
Topic: Factoring with a leading coefficient
A quadratic model is written as , and one of its linear factors is needed in order to find a zero. Which of the following is a factor of ?
A)
B)
C)
D)
Show the worked solution
Answer: C
Explanation
With a leading coefficient, the two numbers must multiply to and add to . That pair is and .
Split the middle term using them:
Factor in pairs:
So the factors are and . Of the options, is there.
Check by expanding: . Correct.
Why each wrong option is wrong:
- A, — used factors of 3 alone, ignoring the leading 2.
- B, — right numbers with the signs swapped; expands to , with the middle sign wrong.
- D, — not a factor at all.
Takeaway: with a leading coefficient , look for two numbers multiplying to and adding to , then split the middle term and factor in pairs.
Topic: Recognising the difference of two squares
An expression in a design formula is . Which of the following is equivalent to ?
F)
G)
H)
J)
Show the worked solution
Answer: F
Explanation
is a difference of two squares: and , with a minus between them and nothing else.
with and :
Check by expanding: , and the middle terms cancel — which is exactly why the pattern has no middle term.
Why each wrong option is wrong:
- G, — expands to , which has a middle term and the wrong constant sign.
- H, and J, — took a square root of only one part.
Takeaway: two perfect squares with a minus between them and no middle term factors as . Take the square root of both parts.
Section 4 — Quadratic Equations
A quadratic equation is one with an and no higher power. Three ways to solve one, in the order you should try them:
- Factor, if it factors easily. Fastest by far.
- Take square roots, if there is no middle term.
- The quadratic formula, which always works:
The ACT does not print that formula. Learn it.
The part under the root, , is the discriminant, and it tells you how many real solutions there are before you find any of them:
| discriminant | real solutions |
|---|---|
| positive | two |
| zero | exactly one |
| negative | none |
Topic: Solving a quadratic by factoring
The height of a projectile returns to zero at the times satisfying , where is the number of seconds since launch. What is that solution?
A)
B)
C)
D)
Show the worked solution
Answer: D
Explanation
Find two numbers multiplying to and adding to . They are and :
A product is zero when one of its factors is zero, so or .
Time cannot be negative, so the answer is .
Why each wrong option is wrong:
- A, — gave the negative root, which the context rules out. This is why the question says the solution must be positive.
- B, and C, — read numbers straight off the equation.
Takeaway: factor, set each bracket to zero, then check the context. A length, a time or a count cannot be negative, and the ACT relies on you noticing.
Topic: The discriminant and exactly one solution
A designer needs the parabola to touch the -axis at exactly one point. The constant is known to be positive. What is the value of ?
F)
G)
H)
J)
Show the worked solution
Answer: J
Explanation
Exactly one real solution means the discriminant is zero:
Here , and :
The question says is positive, so .
Check: , which is zero only at . Exactly one solution. Correct.
Why each wrong option is wrong:
- F, — took the square root of 16 rather than of .
- G, — copied the constant.
- H, — computed and stopped before the square root.
Takeaway: one solution means . And when a squared quantity is solved, there are two answers — read the question to see which sign it wants.
Topic: A quadratic solved by taking roots
A design constraint gives . What are the solutions?
A)
B)
C)
D)
Show the worked solution
Answer: B
Explanation
Take the square root of both sides, remembering both signs:
That is two separate equations:
Check both: and . Both correct.
Why each wrong option is wrong:
- A, — subtracted the 3 rather than adding it when isolating .
- C, — used only , giving one solution twice. A squared equation almost always has two.
- D, — got right and slipped the sign on the other case.
Takeaway: taking a square root gives . Write out both equations separately — trying to hold both in your head is where the sign errors come from.
Section 5 — Radical, Rational and Exponential Equations
Three equation types that each carry one specific hazard.
Radical — square both sides to clear the root, then check every answer in the original equation. Squaring can manufacture solutions that were never there.
Rational (a variable in a denominator) — multiply through by the denominator. Any value that would make a denominator zero is excluded.
Exponential — if both sides can be written with the same base, the exponents must be equal.
Topic: A radical equation with an extraneous solution
A model requires the value of for which , where the square root sign means the non-negative root. What is the solution?
F)
G)
H)
J)
Show the worked solution
Answer: J
Explanation
Square both sides:
Bring everything to one side and factor:
So the squared equation gives and . Both must now be tested in the original, because squaring turns a false statement into a true one: , but .
At : . ✓
At : , and . ✗
The square-root symbol means the non-negative root, so it can never equal a negative number. is extraneous — manufactured by the squaring.
Why each wrong option is wrong:
- F, — kept the extraneous root without testing it.
- G, — added the two roots of the squared equation.
- H, — doubled the right-hand side instead of squaring the left.
Takeaway: after squaring, every solution is only a candidate. Substitute each back into the original equation. A square root is never negative.
Topic: An exponential equation with matched bases
An equation in a growth model reduces to . What is the value of ?
A)
B)
C)
D)
Show the worked solution
Answer: D
Explanation
Both 9 and 27 are powers of 3:
Rewrite both sides:
With the same base, the exponents must be equal:
Check: and . Correct.
Why each wrong option is wrong:
- B, — copied the 4 from the right-hand side.
- C, — reached and gave 12 instead of dividing.
- A, — divided the exponents without converting to a common base.
Takeaway: rewrite both sides as powers of the same base, then set the exponents equal. Look for the small base hiding inside both numbers — usually 2 or 3.
Topic: An equation with the variable in a denominator
An equation from a rate problem is , with the unknown in two denominators. What is the solution?
F)
G)
H)
J)
Show the worked solution
Answer: H
Explanation
Gather the fractions on one side and the numbers on the other:
Multiply both sides by and divide by 2:
Check in the original: and . Correct. And does not make any denominator zero, so it is allowed.
Why each wrong option is wrong:
- F, — subtracted the numerators and stopped, ignoring the constants.
- G, — sign slip while gathering terms.
- J, — added the numerators.
Takeaway: with the same denominator on both sides, combine the fractions first — it is quicker than multiplying everything out. Then check the answer does not make a denominator zero.
Section 6 — Rearranging a Formula
"Solve for in terms of the others" is a standard ACT question and it appeared on both official enhanced forms. There is no new mathematics in it: treat every other letter as if it were a number, and isolate the one you want.
The only real difficulty is that the answer is an expression rather than a number, so there is nothing to substitute back — which makes it worth being slow.
Topic: Solving a formula for one of its variables
The perimeter of a rectangular field is related to its length and its width by . A surveyor knows the perimeter and the length and needs a formula giving the width directly. Which of the following expresses in terms of and ?
A)
B)
C)
D)
Show the worked solution
Answer: B
Explanation
Isolate the term containing :
Divide both sides by 2:
Test it with numbers, which is the only real check available. Take and ; then . Put and into the answer: . Correct.
Why each wrong option is wrong:
- A, — halved before subtracting, so the never got halved.
- C, — subtracted rather than .
- D, — subtracted correctly and never divided.
Takeaway: isolate the term with your letter in it, then divide by everything multiplying it. Test with easy numbers — it catches almost every rearranging error in ten seconds.
Topic: Rearranging when the variable appears inside a fraction
A physics formula is , and it must be rearranged to give on its own, where appears only in the denominator. Which of the following expresses correctly?
F)
G)
H)
J)
Show the worked solution
Answer: G
Explanation
Multiply both sides by to bring it up out of the denominator:
Now divide by :
Test with numbers: let , , . Then , and the answer gives . Correct.
Why each wrong option is wrong:
- F, — multiplied by instead of dividing.
- H, — the reciprocal of the right answer, which is what you get by dividing in the wrong direction.
- J, — moved but not .
Takeaway: to free a variable from a denominator, multiply both sides by it first. Then test with three small numbers; an inverted answer shows up immediately.
Topic: A radical equation with a check that matters
A model requires the value of satisfying , where the root sign denotes the non-negative root. What is the solution?
A)
B)
C)
D)
Show the worked solution
Answer: D
Explanation
Square both sides:
Test both. At : and . ✓ At : but . ✗
A square root cannot be negative, so is extraneous.
Why each wrong option is wrong:
- B, — kept the extraneous root without testing it.
- C, — added the two roots of the squared equation.
- A, — a sign slip expanding .
Takeaway: every solution after squaring is a candidate until substituted back into the original equation.
Topic: A rational equation
A rate problem gives , with the unknown in two denominators. What is the solution?
F)
G)
H)
J)
Show the worked solution
Answer: H
Explanation
Gather fractions on one side and numbers on the other:
Check: and . ✓
Why each wrong option is wrong:
- F, and G, — did one half of the gathering and stopped.
- J, — added the numerators.
Takeaway: with a shared denominator, combine the fractions before doing anything else, and check the answer does not make the bottom zero.
Topic: An exponential relationship
A colony of 500 bacteria grows by 20% each hour, compounding from one hour to the next. What is the population after 2 hours?
A)
B)
C)
D)
Show the worked solution
Answer: C
Explanation
The second hour's growth is calculated on 600, not on 500 — which is why the answer exceeds .
Why each wrong option is wrong:
- A, — stopped after one hour.
- B, — added 20% of the original twice, which is simple growth, not compound.
- D, — grew the wrong base.
Takeaway: compound growth multiplies by once per period. Each period grows from the new amount.
Topic: Exponential decay to a target
A sample decays to 85% of its mass each hour, starting from 400 grams. Which expression gives its mass, in grams, after hours?
F)
G)
H)
J)
Show the worked solution
Answer: G
Explanation
"Decays to 85%" states the multiplier directly: .
Check one hour: , a loss of 60, which is 15% of 400.
Why each wrong option is wrong:
- F, — used , which would leave only 15% each hour.
- H, — linear decay, losing a fixed 0.15 grams per hour.
- J, — a multiplier above 1 grows the sample.
Takeaway: the multiplier is what remains. Decay is below 1, growth above.
Topic: An equation with the variable in a denominator
An equation from a mixing problem is , where the unknown sits inside a denominator. What is the solution?
A)
B)
C)
D)
Show the worked solution
Answer: B
Explanation
Multiply both sides by :
Check: . ✓ And does not make the denominator zero, so it is allowed.
Why each wrong option is wrong:
- A, — is precisely the value that is not allowed: it makes the denominator zero and the expression undefined.
- C, — multiplied 6 by 3 rather than dividing.
- D, — a sign slip.
Takeaway: clear the denominator by multiplying, solve, then confirm the answer does not make any denominator zero.
Topic: A quadratic equation solved by factoring
A rectangular plot's area, in square metres, is given by , where is a length in metres. The area falls to zero at the values satisfying . What is that value of ?
F)
G)
H)
J)
Show the worked solution
Answer: G
Explanation
Find two numbers multiplying to and adding to . They are and :
A product is zero when one factor is zero, so or . A length cannot be negative, so .
Why each wrong option is wrong:
- F, — gave the root the context rules out.
- H, and J, — read numbers straight off the equation without factoring.
Takeaway: factor, set each bracket to zero, then check which root the situation allows.
Topic: A quadratic equation needing the formula
An equation from a model is . What is the larger of the two solutions?
A)
B)
C)
D)
Show the worked solution
Answer: C
Explanation
With , , :
Watch the term: is negative, so , not . That double negative is where the formula usually goes wrong.
Why each wrong option is wrong:
- A, — the smaller root; the question asked for the larger.
- B, — computed , forgetting the part entirely.
- D, — read the leading coefficient off the equation.
Takeaway: substitute , and with their signs, and expect to be positive whenever is negative.
Topic: A quadratic equation with no middle term
A design constraint reduces to . What are the solutions?
F)
G)
H)
J)
Show the worked solution
Answer: H
Explanation
Move the constant across and divide by 4:
Take the square root of both sides, remembering both signs:
Check: . ✓
Why each wrong option is wrong:
- F, — divided by 4 and stopped before the square root.
- G, — rooted the 49 and ignored the 4.
- J, — halved 49 instead of rooting.
Takeaway: no middle term means take square roots. Isolate first, and never lose the .
Topic: A radical equation squared twice over
A model requires the value of satisfying , where each root sign denotes the non-negative root. What is the solution?
A)
B)
C)
D)
Show the worked solution
Answer: D
Explanation
One squaring is not enough here, because a root sign survives it:
The terms cancel, which leaves the remaining root on its own:
Square a second time: .
Check in the original: and . ✓
Why each wrong option is wrong:
- A, — found and stopped before the second squaring.
- B, — squared as instead of , so .
- C, — dropped the 2 and read .
Takeaway: is , not . The middle term keeps a root alive, so isolate it and square again, then check the answer in the original equation.
Topic: A rational equation with two denominators
A rate problem gives , with the unknown in both denominators. What is the solution?
F)
G)
H)
J)
Show the worked solution
Answer: F
Explanation
Cross-multiply:
Check: and . ✓ Neither denominator is zero at , so it is allowed.
Why each wrong option is wrong:
- G, — copied the 6 out of the denominator.
- H, — makes the second denominator zero, which is exactly the value the equation excludes.
- J, — added the two numbers in the question.
Takeaway: cross-multiply, solve, then confirm the answer does not make any denominator zero.
Topic: A rational equation that becomes quadratic
An equation reduces to , where the unknown appears both on its own and in a denominator. What is the smaller solution?
A)
B)
C)
D)
Show the worked solution
Answer: D
Explanation
Multiply every term by :
The smaller is 2. Check: . ✓
Why each wrong option is wrong:
- B, — the larger of the two solutions.
- C, and A, — copied numbers from the equation.
Takeaway: clearing a denominator that contains usually produces a quadratic. Expect two answers and read which one is wanted.
Topic: An exponential relationship written as a percentage
An investment of $2000 grows by 6% each year, compounding annually. Which expression gives its value in dollars after years?
F)
G)
H)
J)
Show the worked solution
Answer: G
Explanation
A 6% rise multiplies by — the whole original, plus another 6% of it:
Check one year: , which is , and 120 is 6% of 2000. ✓
Why each wrong option is wrong:
- F, — would leave 6% of the money after a year, a 94% loss.
- H, — linear growth, adding 6 cents a year.
- J, — multiplies the money sixfold every year.
Takeaway: a rise per period is a multiplier of . Test one period against plain arithmetic.
Topic: An exponential equation with matched bases
An equation from a growth model is . What is the value of ?
A)
B)
C)
D)
Show the worked solution
Answer: C
Explanation
Both 8 and 32 are powers of 2:
Same base, so the exponents match:
Why each wrong option is wrong:
- A, — divided 32 by 8, which is not how exponents combine.
- B, — solved , forgetting the inside the bracket.
- D, — a whole-number guess; , not 32.
Takeaway: find the small base hiding inside both numbers — usually 2 or 3 — then set the exponents equal. Do not forget what is inside the bracket.
Topic: Exponential decay over several periods
A sample loses 20% of its mass each hour, starting at 500 grams. What is its mass, in grams, after 3 hours?
F)
G)
H)
J)
Show the worked solution
Answer: H
Explanation
Keeping 80% each hour means multiplying by three times:
Note it is not . Each hour's loss is 20% of what is left, which shrinks: 100, then 80, then 64.
Why each wrong option is wrong:
- F, — took 20% of the original three times, which is simple decay, not compound.
- G, — stopped after one hour.
- J, — subtracted a fixed amount three times.
Takeaway: decay multiplies by once per period. Each period works from the new amount, so the loss gets smaller every time.
Topic: Rearranging a formula with a fraction
The formula gives the area of a triangle. A designer knows the area and the base and needs a formula for the height directly. Which of the following expresses in terms of and ?
A)
B)
C)
D)
Show the worked solution
Answer: A
Explanation
Multiply both sides by 2 to clear the fraction:
Then divide by :
Test with numbers: , gives ; and . ✓
Why each wrong option is wrong:
- B, — divided by 2 rather than multiplying, so the fraction was never cleared.
- C, and D, — multiplied by instead of dividing.
Takeaway: clear the fraction first, then divide by everything multiplying your letter. Test with three easy numbers — an inverted answer shows at once.
Topic: Rearranging a formula where the variable appears twice
The formula gives the surface area of a cylinder. An engineer knows and and needs on its own. Which of the following gives ?
F)
G)
H)
J)
Show the worked solution
Answer: G
Explanation
Only the second term contains , so move the first one across:
Now divide by everything multiplying , which is :
Why each wrong option is wrong:
- F, — divided by and lost the .
- H, — divided before subtracting, so the first term was not divided too.
- J, — dropped the altogether.
Takeaway: subtract before you divide, and divide the whole side. A term that does not contain your letter must be moved across first.
Topic: Rearranging to make a squared variable the subject
The formula gives the area of a circle. A manufacturer knows the area and needs the radius. Which of the following gives ?
A)
B)
C)
D)
Show the worked solution
Answer: A
Explanation
Divide both sides by :
Then take the square root of the whole side:
A radius cannot be negative, so only the positive root is kept.
Why each wrong option is wrong:
- B, — isolated and stopped.
- C, — rooted the but not the . The root applies to everything under it.
- D, — rearranged the circumference formula instead.
Takeaway: isolate the squared term, then root the entire side. Keep only the positive root when the letter is a physical length.
Topic: A radical equation with a whole-number solution
A model requires the value of satisfying , where the root sign denotes the non-negative root. What is the solution?
F)
G)
H)
J)
Show the worked solution
Answer: G
Explanation
Square both sides:
Check: . ✓
Nothing extraneous can appear here, because the right-hand side is already positive — the trouble only starts when it contains a variable that might be negative.
Why each wrong option is wrong:
- F, — subtracted the 1 before squaring, so the 4 was never squared.
- H, — squared to 16 and stopped, ignoring the rest of the equation.
- J, — divided 4 by 3 without squaring at all.
Takeaway: square first to clear the root, then solve. Substitute back whenever the other side contains a variable.
Topic: A rational equation with an excluded value
An equation from a rate problem is . What is the solution?
A)
B)
C)
D)
Show the worked solution
Answer: A
Explanation
Multiply every term by to clear the fractions:
Expand the bracket:
Subtract from both sides:
Check in the original: , and . ✓
And does not make the denominator zero, so it is allowed.
Why each wrong option is wrong:
- B, — makes both denominators zero. It is the one value the equation rules out before any working begins.
- C, — copied the numerator.
- D, — a sign slip while gathering the terms.
Takeaway: combine fractions over a shared denominator, then solve — and note the excluded value before you start, so you can reject it on sight.
Topic: An inequality with brackets
A control rule requires , where is an adjustable input. Which of the following gives all values of that satisfy the inequality?
F)
G)
H)
J)
Show the worked solution
Answer: F
Explanation
Expand, remembering the multiplies both terms:
Gather on the side that keeps it positive — subtract , that is, add :
Gathering this way avoids dividing by a negative, so no sign flip is needed at all.
Why each wrong option is wrong:
- G, — right boundary, wrong direction.
- H, — expanded as , keeping the sign of the 4.
- J, — both errors together.
Takeaway: expand carefully through a negative, then gather on whichever side leaves it positive. That removes the sign-flip rule entirely.
Topic: A system with infinitely many solutions
The system , where is a constant, has infinitely many solutions. What is the value of ?
A)
B)
C)
D)
Show the worked solution
Answer: C
Explanation
The second equation's left side is exactly twice the first's:
For the two to be the same line, the right side must be doubled too:
Check: divides by 2 to give — the same equation. Every solution of one is a solution of the other.
Contrast with no solution: any other value of makes the lines parallel and distinct, and they never meet.
Why each wrong option is wrong:
- A, — leaves the lines parallel and distinct: no solution at all.
- B, — gave the scale factor rather than applying it.
- D, — used a factor of 3.
Takeaway: infinitely many solutions means one equation is a multiple of the other, right-hand side included. Find the factor from the coefficients and apply it.
Topic: A system solved for an expression rather than a variable
Two conditions give and . The question asks for . What is the value of ?
F)
G)
H)
J)
Show the worked solution
Answer: J
Explanation
Solving for and works too — , , and — but the factorisation gets there in one line.
Why each wrong option is wrong:
- F, and G, — combined the two given values with the wrong operation.
- H, — found and squared it, forgetting the .
Takeaway: when a question asks for an expression rather than a variable, look for a factorisation that uses what you were given directly. The difference of two squares is the one the ACT reaches for most.
Topic: Factoring out a common factor first
An expression in a design formula is . Which of the following is fully factored?
A)
B)
C)
D)
Show the worked solution
Answer: A
Explanation
Take out the 3 first:
What is left is a difference of two squares:
Check by expanding: . ✓
Why each wrong option is wrong:
- B, — expands to the right thing and is not wrong as an expression, but it is not fully factored: still contains a common factor of 3. That is the whole point of the word "fully".
- C, — a perfect square would give a middle term, and this expression has none.
- D, — expands to .
Takeaway: always look for a common factor first. It makes the numbers smaller and often exposes a pattern that was hidden.
Topic: Completing the square
The equation can be rewritten as , where and are constants. What is the value of ?
F)
G)
H)
J)
Show the worked solution
Answer: H
Explanation
Move the constant across:
Halve the coefficient of and square it: half of 6 is 3, and . Add 9 to both sides:
So and .
Why each wrong option is wrong:
- F, — copied the original constant.
- G, — gave the 9 that was added, not the total on the right.
- J, — gave rather than .
Takeaway: halve the coefficient, square it, add to both sides. Then read which letter the question wants — and are easy to confuse.
Topic: The sum of a quadratic's solutions
An analyst needs the sum of the two solutions of . What is that sum?
A)
B)
C)
D)
Show the worked solution
Answer: A
Explanation
For the two solutions add to :
Check by solving: , so the roots are 1 and 4, which add to 5. ✓
The companion fact is worth learning at the same time: the roots multiply to , and . ✓
Why each wrong option is wrong:
- B, — used without dividing by .
- C, — gave the product of the roots.
- D, — dropped the minus in ; is already negative, so the answer is positive.
Takeaway: roots sum to and multiply to . Both are faster than solving when the question asks only for the sum or product.
Topic: An exponential equation solved by inspection
A growth model reduces to . What is the value of ?
F)
G)
H)
J)
Show the worked solution
Answer: F
Explanation
Count the doublings: 2, 4, 8, 16, 32, 64, 128 — seven of them.
Why each wrong option is wrong:
- G, — divided 128 by 2. An exponent is not a quotient.
- H, — , one doubling short.
- J, — , one doubling too many.
Takeaway: with small powers, counting the multiplications is faster than any rule. Knowing the powers of 2 up to 1024 pays for itself repeatedly.
Topic: An inequality from a real constraint
A delivery van weighs 1200 kg empty and each crate loaded into it weighs 45 kg. A bridge has a weight limit of 2100 kg. Which inequality gives all the numbers of crates the van may carry across?
A)
B)
C)
D)
Show the worked solution
Answer: C
Explanation
Total weight is the van plus the crates:
Remove the van's own weight first — it is there whether or not any crates are loaded:
A count cannot be negative, so .
Why each wrong option is wrong:
- A, — divided 2100 by 45 without removing the van's weight, allowing 46 crates and over 3000 kg.
- B, — reversed the inequality, permitting exactly the loads the bridge forbids.
- D, — added the van's weight instead of subtracting it.
Takeaway: a fixed weight is not part of the rate. Subtract it before dividing, and check the answer against the original limit.
Topic: Multiplying two binomials with coefficients
A cost model needs written without brackets before its terms can be collected. Which expression is equivalent?
F)
G)
H)
J)
Show the worked solution
Answer: H
Explanation
Four products:
Collect the middle: .
Check at : the original is , and . ✓
Why each wrong option is wrong:
- F, — multiplied only the first terms and the last terms, missing both middle products.
- G, — treated the as , so both of its products came out positive.
- J, — sign wrong on the middle term; is positive, because the larger product is the positive one.
Takeaway: four products, then collect the two middle terms. Check at — it takes five seconds and catches nearly every slip.
Topic: An equation with a variable on both sides and fractions
An equation from a comparison is . What is the value of ?
A)
B)
C)
D)
Show the worked solution
Answer: A
Explanation
Multiply every term by 10, the lowest common denominator of 2 and 5:
Check: and . ✓
Why each wrong option is wrong:
- B, — subtracted the constants and ignored the terms.
- C, — reached and multiplied rather than divided.
- D, — divided 10 by 3 instead of 30 by 3.
Takeaway: clear all fractions in one move by multiplying every term by the lowest common denominator. Then it is an ordinary linear equation.
Topic: A rational equation solved by cross-multiplying
An equation from a scaling problem is . What is the value of ?
F)
G)
H)
J)
Show the worked solution
Answer: G
Explanation
Cross-multiply:
Check: and . ✓
Why each wrong option is wrong:
- F, — multiplied out only one side.
- H, — a sign slip while gathering the terms.
- J, — copied a constant from a numerator.
Takeaway: cross-multiplying handles two fractions in one move. Expand both brackets fully before gathering.